vxdiskunsetup (1M)


vxdiskunsetup - remove the Veritas Volume Manager configuration


/etc/vx/bin/vxdiskunsetup [-Cf] [-o shred=[1|3|7]] disk_address...


The vxdiskunsetup command removes the Veritas Volume Manager (VxVM) configuration from one or more disks. The vxdiskunsetup command reverses the configuration done by the vxdisksetup command. This operation makes the disks unusable by VxVM. The vxdiskunsetup command can be applied only to VxVM-initialized disks that are not in use within an imported disk group.

The disk_address argument passed to vxdiskunsetup directs the command to the device that corresponds to the disk being operated upon. The name must reference a valid disk with partition devices under the /dev/vx/rdmp directory.

The vxdiskunsetup command operates by removing the public and private regions that were created by the last invocation of vxdisksetup on the specified disks. After this operation, those disks are converted from the online to the online invalid (as displayed by vxdisk list).


-C By default, the vxdiskunsetup command does not operate on disks that appear to be imported by some other host (for example, a host that shares access to the disk). In this case, specify the -C option to force de-configuration of the disk, effectively removing the host locks that were detected by vxdiskunsetup.
-f By default, the vxdiskunsetup command does not shred Solid-State Drive (SSD) disks. Specify the -f option to force a shred operation on an SSD disk.
-o shred[=1|3|7]
  The shred operation overwrites the data on the disk with a digital pattern in one or more passes. Specify the number of passes as 1, 3, or 7. The default is 1 pass.


Force deconfiguration of a VxVM-initialized disk, enc3_5:

/etc/vx/bin/vxdiskunsetup -C enc3_5

Shred a VxVM-initialized disk, hds9970v0_14, with 3 passes.

/etc/vx/bin/vxdiskunsetup -o shred=3 hds9970v0_14



VxVM 6.0 vxdiskunsetup (1M)