Bringing up the existing node

Bring up the node.

To bring up the node

  1. Log in as superuser.

  2. Make the VCS configuration writable.

    # haconf -makerw
  3. Display the service groups currently configured.

    # hagrp -list
  4. Freeze the service groups.

    # hagrp -freeze group -persistent

    Repeat this command for each service group in step 3.

  5. Make the configuration read-only.

    # haconf -dump -makero
  6. Stop VCS on Node A.

    # hastop -local -force
  7. Enable the GAB and LLT startup files so they can be used.

    # mv /etc/rc.d/rc2.d/X92gab /etc/rc.d/rc2.d/S92gab
    # mv /etc/rc.d/rc2.d/X70llt /etc/rc.d/rc2.d/S70llt